Aluart Standard Banner Arm Flagpole
The Aluart Standard Banner Arm Flagpole is a theft-proof flagpole, ideal for displaying advertising flags. This cost-effective flagpole was conceived for permanent use and is provided with a rotating arm to show the whole flag optimally even when there is no wind. This flagpole is ideal for businesses, shopping centers, restaurants, etc. This flagpole can be installed without problems even in exposed locations.
This well-established, easy-care flagpole is produced in sizes from 16' 5" to 39' 4" in one or two-piece versions. Thanks to the rotating arm (not hoistable), the full size of the flag can be seen even when there is no wind. The flag is fixed lengthways by the supplied plastic tubes and does not create any noise. The attachable rotating arm, not adjustable from the ground, offers the best possible protection from theft and vandalism. The arm turns freely in the wind a full 360∞. To simplify the changing of the flag we recommend a hinged base plate. Smaller flagpoles can also easily be installed with a ground tube or a ground socket with center ring. The flagpole equipped with plastic head comes as standard, an aluminum head is optional.
The flagpole does not require maintenance. Check plastic tubes when changing the flag and replace when necessary.
The distance between two flagpoles must total the minimum twice the flag width plus 16 inches! For the placing of a hinged base plate, please refer to the separate operating and assembly instructions. In stormy weather (Beaufort 8+ winds) the flag must be taken down for safety reasons.
Plastic rotating head (from 29' 6" with aluminum rotating head)
Counterweight with lockable carbine hook